DATALOGIC
8
CONNECTING AND DISCONNECTING THE BC-80X0
INTERFACE CABLE
The BC-80X0 can be connected to a Host by means of an RS-232, USB, Wedge
or Pen cable, which must be simply plugged into the Host connector, visible on
the front panel of the cradle.
To disconnect the cable, insert a paper clip or other similar object into the hole
corresponding to the Host connector on the body of the cradle. Push down on the
clip while unplugging the cable. Refer to the following figure:
Connecting/Disconnecting the Cable
RS-232
USB
Power
Multi-standard
interface
RS-232, USB, WEDGE, or
PEN Emulation to Host