Datalogic AV7000, Reference Manual

Page: 110 / 337

AV7000 LINEAR CAMERA REFERENCE MANUAL
98
4
This Cluster
Online Green = Online (connected and recognized in the cluster)
Gray = Unit not connected (unit not seen by master)
Yellow = Online, but not assigned to the cluster (shown under Cameras not in this
Cluster)
Red = Offline
Status Green = No errors and ready to read
Gray = Unit not connected (unit not seen by master)
Yellow = Warning present
Red = Error. If you click on the MAC address, it will take you to the status viewer
page for more info on the error
MAC Address Displays the internal MAC Address (Media Access Control Address) the device
used for camera-to-camera communications.
Click the
MAC Address link to view details about that specific device (See Device
Details below).
IP Address Displays the internal IP address of the unit used for camera-to-camera
communication.
Camera Position Select Not Assigned, Top, Left, Right, or Bottom from the drop-down list.
Camera Name Displays the camera's name assigned in Modify Settings | Device Settings |
<device> | Device Info.
Action Click Blink . This identifies the camera in the array. When clicked, the camera
illumination turns on for around 10 seconds.
Cameras not in
this Cluster Displays a list of discovered cameras not currently included in the cluster. This
includes the same information listed above for each camera.
See section 4.4 for
information on moving AV7000 cameras into the Cluster.
3. When you have finished making changes, click
Update to save or click Reset to revert to
the previously saved values. 0.