Datalogic AV7000, Product Reference Manual

Page: 267 / 352

SETTING UP THE DM3610 DIMENSIONER
PRODUCT REFERENCE GUIDE
253
4. Enter the result into the RIGHT OFFSET field as a negative value, in our example it
is -3.5.
5. Note the position value displayed for RIGHT is now 3.
6. Click Update to save the changes.
7. Test the system by inducting a series of application objects and bar codes. Use the
AV7000 imaging utility to verify that the cameras are focusing properly over the
width and height of the conveyor.
8. Under Tachometer , select Hardware/External from the Tach Source drop-down
list.
9. Click Update .
Adjusting Height Offset
When working with a DC3000 multi-head based Dimensioning system, the text box must
intercept all dimensioning lines.