Datalogic AV7000, Product Reference Manual

Page: 264 / 352

FOCUSING SETUP AND CALIBRATION
250
AV7000 LINEAR CAMERA
Adjusting DM3610 Left Focus Offset
1. Position a test box with a known width in the dimensioner line(s) so the side of the
box is at the RIGHT side AV7000 far working distance as specified by the applica-
tion’s installation drawing. In this example we will be using a box with a 3” width.
2. In the menu tree under Diagnostics , click Focus Setup . The Focus Setup Window
opens.
When working with a DC3000 multi-head system, the text box must intercept all dimen-
sioning lines
When working with a DC3000 based Dimensioning system, please allow time for the
constant tach signal to synchronize between the Master and Slave units.