Datalogic AI7000 Product Reference Manual Download

Page: 238 / 352

E-GENIUS

224

AV7000 LINEAR CAMERA

Enabling Diagnostics | Conveyor View

Two settings must be enabled in order for the

Conveyor View

to be available.

7. Access

Device Settings | Camera_1 | Logging

and the logging window will open.

8. Select the checkbox to enable

Protocol Index Logging.

9. Click

Update

to save your changes.

10. Access

Global Settings | Communications | Transports

and the Transport List win-

dow opens.

11. From the Log Type drop-down select

Advanced.

Summary of Contents for AI7000

































































































































































































































































































































































Search results

Summary of Contents for AI7000

Reviews:

Related manuals for AI7000

Brands by name

Popular brands

Datalogic AI7000, Product Reference Manual

Search results

Summary of Contents for AI7000

Reviews:

Related manuals for AI7000

Brands by name

Popular brands