Sentry K300 Managed User Guide
6. Device will show the message “The initialized password is ‘1234567’ ”. Unplug the device and
press any key to continue.
7. Device will show the message “You must reformat the drive.” Press any key to continue.
8. The device will power off and back on automatically. The password entry screen will be
displayed when it is finished restarting. Enter the default password of
1234567
.
9. See
for more information on how to create a new file system.
Inactivity Mode
The device is programmed to power off after 60 seconds of inactivity. To power back on, press the
Power
button. This setting cannot be turned off.
Note:
The device will not power off while connected to the computer. The screen may turn off after
10 seconds to prevent screen burn-in, however, you can revive it by pressing any key.
Main Menu Screen Options
•
Change Password:
Change the device password.
•
User Password:
User Password is disabled after registering to SafeConsole.
•
Strong Password:
Enforce strong password requirements for new password changes.
Requirements:
–
8 characters
–
1 letter
–
no consecutive numbers
–
no consecutive letters
•
Minimum Password Length:
Can be set to require 7-30 password characters for all new pass-
words.
•
SafeConsole:
Enables SafeConsole mode, cannot be disabled after registering to SafeCon-
sole.
•
Read-Only Mode:
Read-Only Mode in this menu is disabled after registering to SafeConsole.
•
Auto Lock:
Set the amount of inactivity time (in minutes) before the device automatically
locks. The maximum number of minutes that can be entered is 180. A second auto lock timer
can be configured in SafeConsole. Both timers will apply.
•
Zeroize:
Zeroize is disabled in after registering to SafeConsole.
Formatting The Sentry K300
Selecting The Correct File System
Your device is formatted as
NTFS
from the factory.
© 2019 DataLocker Inc. All rights reserved.
17