DPR-400 User Manual Rev_01 Firmware V-1.0
- 70 -
The unit conforms to the EU directives:
-2014/35/EC (Low Voltage)
-2014/30/EC (electro-magnetic compatibility)
Norms of Reference:
EN 61010 (safety requirements)
EN 61326 (EMC requirements)
The CE mark indicates that this product complies with the European requirements for safety,
health, environmental and customer protection.
Wipe the unit, if necessary, with a soft damp cloth. Do not use chemical agents.
Following directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003 on
waste electrical and electronic equipment (WEEE), this unit should be stored and disposed separately
from usual waste.
The unit is compliant to
“DIRECTIVE 2011/65/EU OF THE EUROPEAN PARLIAMENT AND OF THE
COUNCIL of 8 June 2011 on the restriction of the use of certain hazardous substances in
electrical and electronic equipment”.
Any of below substances is not used in this device:
Lead (Pb)
Mercury (Hg)
Cadmium (Cd)
Hexavalent chromium (Cr6+)
Polybrominated biphenyls (PBB)
Polybrominated diphenyl ether (PBDE)
Bis(2-ethylhexyl) phthalate (DEHP)
Butyl benzyl phthalate (BBP)
15. DECLARATION OF CONFORMITY
16. MAINTENANCE
DO NOT OPEN THE UNIT!
There are NO serviceable parts inside the unit.
17. DISPOSAL OF THE UNIT
18. ROHS COMPLIANCE