DKG-175 User Manual V-1
(24.07.2017)
- 2 -
Electrical equipment should be installed only by qualified specialist. No responsibility is
assured by the manufacturer or any of its subsidiaries for any consequences resulting from
the non-compliance to these instructions.
Check the unit for cracks and damages due to transportation. Do not install damaged
equipment.
Do not open the unit. There are no serviceable parts inside.
Fuses must be connected to the power supply and phase voltage inputs, in close proximity of
the unit.
Fuses must be of fast type with a maximum rating of 6A.
Disconnect all power before working on equipment.
When the unit is connected to the network do not touch terminals.
Any electrical parameter applied to the device must be in the range specified in the user
manual. Although the unit is designed with a wide safety margin, over-range parameters may
reduce lifetime, alter operational precision or even damage the unit.
Do not try to clean the device with solvent or the like. Only clean with a dump cloth.
Verify correct terminal connections before applying power.
SAFETY NOTICE
Failure to follow below instructions
will result in death or serious injury
