15
WWW.RAPIDRH.COM
WAGNER METERS
1. Carefully remove the screws near the top with a
small Phillips head screwdriver.
2. Tip the DataGrabber with Bluetooth upside down
and tap the bottom of the unit carefully to dislodge
the battery into your palm.
3. Place the battery (replaceable CR 1/3N) within the
well positive side up. (Note: the battery text should
be visible.)
4. Insert the battery until it stops. Be careful to avoid
using excessive force.
5. Replace the battery compartment cover and
carefully re-install the two screws using a small
Phillips head screw driver.
BATTERY
DataGrabber with Bluetooth
Removing and Replacing the Battery
1
2
