![DataDirect Networks S2A9550 User Manual Download Page 47](http://html.mh-extra.com/html/datadirect-networks/s2a9550/s2a9550_user-manual_511620047.webp)
M a n a g i n g t h e S 2 A 9 5 5 0
D a t a D i r e c t N e t w o r k s S 2 A 9 5 5 0 U s e r G u i d e
35
3.2
Configuration Management
The S2A9550 provides uniform configuration management across heterogeneous SAN. Status of host
ports and storage assets are continuously being monitored.
3.2.1
Configure and Monitor Status of Host Ports
The status information of the host ports can be obtained at any time.
The
HOST
command displays the current settings and status for each host port
. It also
displays a list of the users currently logged into the system. An unauthorized user is given the user
name, Anonymous.
The
PORT=X|ALL
parameter specifies the specific host port(s) (1..4) to be affected when used in
combination with any of the other parameter: ID, TIMEOUT, UART, WWN. Default is to apply
changes to ALL host ports.
3.2.1.1
Host ID
The
HOST ID=<new ID>
command changes the hard loop ID of a host port. This is the Fibre Channel
AL_PA value which the host port uses. The system selects a soft ID if the hard loop ID is already taken
by another device. This parameter is entered as an 8-bit hex value. The default value is EF.
3.2.1.2
Host WWN
The
HOST WWN=<x|0|DEFAULT>
command can be used to over-ride the system ID and specify a
different World Wide Name for a host port. This parameter is entered as an 64-bit hex value. Default
WWN is 0.
CLI session:
Current owner : admin.
Figure 3-5 “Who Am I Screen
S2A [1]: whoami
Current security level: Administrative.
seconds
Host Port Configuration
Current
Loop ID
Port
World Wide Name
Loop Status
Hard
Loop ID
21000001FF040004
-----------------------------------------------------------------------------------
EF
EF
1
Figure 3-6 Host Ports Status Screen
S2A [1]: host
Host
Good
Current Logins
30
22000001FF040004
EF
EF
2
Not connected
30
23000001FF040004
EF
EF
3
Good
30
24000001FF040004
EF
EF
4
Good
30
Timeout
-----------------------------------------------------------------------------------
Port
Frame
S_ID
User
Login
10000000C92135FE
1
World Wide Name
2048
2
Client1
WED JAN 28 17:04:32 2004
200000E08B002D4C
2
2048
E8
Anonymous
WED JAN 28 17:03:13 2004
Port Speed
Desired/Actual
4Gbps/1Gbps
4Gbps/-NA-
4Gbps/1Gbps
4Gbps/1Gbps
Summary of Contents for S2A9550
