Connecting Hosts
E F 3 0 1 5 S e t u p G u i d e ( R e v A )
22
Multiple servers/FC SAN fabric/two storage systems
Building “A”
Building “B”
Local campus
SAN
LAN
Corporate
end-users
Application
Servers A
Application
Servers B
File
Servers
FS data
App “A”
data
App “B”
replica
App “B”
data
App “A”
replica
FS
replica
EF3015 controllers
(typical 2 places)
Figure 13. Connecting two systems for AssuredRemote — multiple servers/SAN/two locations
shows two FC host interface connection and volume replication.
3.8
Updating Firmware
After installing the hardware and powering on the storage system components for the first
time, verify that the controller modules, drive modules, and disk drives are using the current
firmware release. Using RAIDar, right-click the system in the Configuration View panel, and
select
Tools > Update
Firmware. The Update Firmware panel displays the currently
installed firmware versions, and allows you to update them.
3.9
Obtaining IP Values
You can configure addressing parameters for each controller module’s network port. You
can set static IP values or use DHCP.
3.9.1
Setting Network Port IP Addresses using DHCP
1.
Look in the DHCP server’s pool of leased addresses for two IP addresses assigned to
your EF3015 controller enclosure.
