8
3.3
Setup For Use With DCB Access Switch
To configure your Access Switch to work with the external DCB dial-
up modem first attach the modem to input port 1 (1 IN DTE) using
the Modem to Composite cable provided. Next attach a terminal or
PC to input port 2 (2 IN-DTE) using the green cable and the
appropriate adapter. Set the terminal for 9600 8,N,1. When you see
the Access >> prompt, follow the instructions below. User responses
are shown in
BOLD
.
To Disconnect enter: ^D^D^D
Access >>
SETUP<Enter>
ATTENTION: There is no Setup Password
Enter PW to set password
**** Access Switch - V7.15 ****
AS-8
>> Enter H<CR> for Help
SETUP >>
CM<Enter>
CONFIGURE MODEM
--------- -----
Port 1 as modem port - currently set to: NO
(Enter YES or NO) ?
Y<Enter>
Current Modem Commands: &C1&D2S0=1&W
New Commands (enter "CLEAR" for default) ?
<Enter>
Current dialout port timeout 15 seconds.
New timeout?
<Enter>
SETUP >>
BYE<Enter>
To Disconnect enter: ^D^D^D
Access >>
