© 2017 Datacom Systems Inc
30
SS-1200, SS-2200, SS-4200 Series USERguide
4.7.3
Set Port Speed(SE PO SP)
Usage
Guidelines
This command is used to set the speed of a port. If the speed is set for a network
port, both ports in a network pair will be changed.
Syntax
Set Port Speed <port number/port list> <speed>
Example
Set Port Speed 3 AUTO
Speed
Options
10HALF
100HALF
10FULL
100FULL
1000FULL
AUTO
4.7.4
Set Port Vtag (SE PO VT)
Usage
Guidelines
This command is used enable/disable vlan tag stripping form a port. If enabled, all
traffic that is received by the port will have a single vlan tag stripped. Please note
that this may have an effect on live network traffic.
Syntax
Set Port Vtag <port number/port list> (on/off)
Example
Set Port Vtag 3,4 on
4.7.5
Show Groups (SH GR)
Usage
Guidelines
This command is used to show the currently configured groups, and which ports
they consist of.
Syntax
Show Groups
Example
Show Groups
4.7.6
Show Port Config (SH PO CO)
Usage
Guidelines
This command is used to show all available configurable information on each port,
including current link status and speed.
Syntax
Show Port Config
Example
Show Port Config
