manualshive.com logo in svg

Datacolor ColorReaderPRO DC10-1, User Manual, Page: 9 / 31

Share
Download
Datacolor ColorReaderPRO DC10-1 User Manual Download Page 9

Datacolor ColorReaderPRO 

 

 

 

 

•

  5 

Display  

At start-up, the screen briefly displays the serial number, the firmware revision number, and 
date of the most recent calibration. If the calibration has not elapsed, it will report that it is 
ready to measure.

  

 

 

 

 

 

Following a measurement, you will see the names of the 3 closest colors in the fan deck 
data base displayed, one-by-one. They include the collection name and color number.   

 

 
 

Battery Information and LED Indicator 

Datacolor ColorReaderPRO is equipped with a rechargeable lithium battery. A micro-USB 
cable is provided to charge the unit. When fully charged, the 
charge is good for 500 measurements. 

A battery icon displays the remaining battery life. A lightning 
bolt appears next to the battery icon when the device is 
connected with the USB cable to a power source

. 

An LED indicator displays the current state of the device.

 See 

Status LED

 for details. 

Cable Connections and Instrument Charging 

Datacolor ColorReaderPRO has a micro USB port and a micro 
USB cable for charging

 

To charge: 

•

 

Plug the small end of the USB cable into the device.   

•

 

Plug the other end into a USB port on a computer or 
adapter.   

Status LED 

An LED indicator identifies the current state of the unit. Below is a list of possible instrument 
states: 

LED Color 

Instrument State 

Off 

•

 

Device is not powered and is not charging 

Green 

Solid

 

•

 

Device is 

On

 and battery life is 

greater than

 

10%

 

•

 

Device is charging (refer to battery icon for charge level 
when unplugged).

 

Amber 

Slow blink

 

•

 

Device is not being charged and battery life is 

less than 10%

 

 

 

 
 

 

 
 
 

 

 

 

 

 

 

    

 

Serial No. 

Firmware Version

 

 

 

Last Calibration 

Summary of Contents for ColorReaderPRO DC10-1
































Reviews:

No comments