Datacolor 9020-0129 Operating Manual Download

Page: 95 / 127

Datacolor CONDITIONER™ (MB2) 06/2017

page 95/126

14.5.1.2 Display of MAC address

Path:

Main menu > Device info > Ethernet

“Ethernet” submenu (example).

14.5.2 Web server

This controller menu serves to configure the web server. Then you can enter the cabinet’s IP-address in
the Internet. The IP address is available via

Chamber information > Ethernet

. The web server opens.

Enter the user name and password which have been assigned for the web server in the controller menu.
This enables online access to the controller display, to see e.g., the event list or error messages. In this
view no settings can be changed.

Path:

Main menu > Settings > Web server

“Webserver” submenu.

•

In the field “Password active” select the desired

setting “Yes” or “No”.

•

Select the field “User name” and enter the desired user name. Confirm entry with

Confirm

icon.

•

Select the field “Password” and enter the desired password. Confirm entry with the

Confirm

icon.

•

Select the field “Automatic log out after” and enter the time in minutes after which the webserver shall

log out automatically. Setting range: 0 min to 65535 min. Confirm entry with

Confirm

icon.

After completing the settings, press the

Confirm

icon to take over the entries and exit the menu,

press

the

Close

icon to exit the menu without taking over the entries.

Summary of Contents for 9020-0129
































































































































Search results

Summary of Contents for 9020-0129

Reviews:

Related manuals for 9020-0129

Brands by name

Popular brands

Datacolor 9020-0129, Operating Manual

Search results

Summary of Contents for 9020-0129

Reviews:

Related manuals for 9020-0129

Brands by name

Popular brands