![background image](http://html1.mh-extra.com/html/datacard/sd260l/sd260l_installation-and-administrators-manual_3729528046.webp)
34
Elements of Card Design
Smart Card Codes on the Printer Label
The configuration label includes codes that identify the type and model of the smart card module
installed in the printer. The following table lists the codes used on the configuration label.
The S1 value on the configuration label indicates that the printer has the basic smart card
components installed. Basic components include the mounting hardware only. An integrator
must install a contactless reader.
If the Sx value is included in the configuration code, the printer has the basic components of an
S1, plus the appropriate interface installed.
Code on Label
Type of Smart Card Module
S1
Integrator Contactless
S3
HID pcProx Contactless
S4
iCLASS Read Contactless
S5
iCLASS Read/Write Contactless
S6
DUALi Standard
S7
DUALi Single Wire
S8
DUALi Single Wire Sony Felica
S9
GEMPC USB / pcProx Dual
S10
Contact Station
S11
Identive Dual Interface Reader
S12
pcProx Plus Dual Frequency
S13
DUALi Single Wire Large Memory
The smart card readers available may vary by printer model. Contact your authorized
dealer for more information.
Summary of Contents for SD260L
Page 8: ...viii ...
Page 30: ...18 Installation ...
Page 48: ...36 Elements of Card Design ...
Page 114: ...102 Supplies and Parts ...