![background image](http://html1.mh-extra.com/html/datacard/cr825/cr825_installation-and-administrators-manual_3689160018.webp)
2
Printer Installation
Ethernet Requirements
You can connect many network printers to one PC. The maximum number of printers depends on
the capacity of the network to deliver data to the printer.
The following components are required to install a printer on a network:
An Ethernet network that uses the TCP/IP protocol and can run at one of the following:
1Gbase-T (1 gigabyte per second) or 100base-T (100 megabits per second).
An Ethernet cable to connect the printer to the network. An Ethernet cable is not supplied
with the printer.
, and is connected to, and communicating
with, the network.
Electrical Requirements
The power supply detects the input voltage and works within the range stated.
Printer Model
Electrical Requirements
Input
Output
CR825
85–230VAC/47-63 Hz/1.2Amp
24V/6.6Amp/160W
CE875
Refer to
Summary of Contents for CR825
