![background image](http://html1.mh-extra.com/html/datacard/cr805/cr805_user-manual_3686106115.webp)
CR805 Retransfer Card Printer User’s Guide
99
198: L1 area card problem
The card is not where it should be in the laminator.
1.
Open the laminator and remove the L1 supply cartridge.
2.
Turn the knob to remove the card.
3.
Replace the supply cartridge and close the laminator.
On the PC, click Retry, or click Cancel to cancel the card.
199: L2 area card problem
The card is not where it should be in the laminator.
1.
Open the laminator and remove the L2 supply cartridge.
2.
Turn the knob to remove the card.
3.
Replace the supply cartridge and close the laminator.
On the PC, click Retry, or click Cancel to cancel the card.
200: Laminator exit card problem
The card is not where it should be in the laminator.
1.
Open the laminator.
2.
Turn the knob to remove the card.
3.
Close the laminator.
On the PC, click Retry, or click Cancel to cancel the card.
201: L1 supply problem
The L1 supply is not moving properly. To try another card:
1.
Open the laminator and remove the L1 cartridge.
2.
Reposition, repair, or replace the supply and advance the repaired area one full turn.
3.
Replace the cartridge and close the laminator.
On the PC, click Retry, or click Cancel to cancel the card.
Summary of Contents for CR805
