![background image](http://html.mh-extra.com/html/datacard/ce875/ce875_installation-and-administrators-manual_511427136.webp)
A-16
CE875 Instant Issuance System
6.
Replace the topping foil cartridge.
a.
Hold the cartridge by its handle.
b.
Align the top of the cartridge with the guides
inside the embosser.
c.
Slide the cartridge in until it clicks and stops.
7.
Close and lock the embosser supplies access door.
Power On the System
Press the power button on the front panel of
the printer to power on the system. The printer
and embosser perform internal checks and
initialize supplies.
The first time you power on the system, you must enter an activation code. You need
both the printer and embosser serial numbers. Refer to
for complete information.
Summary of Contents for CE875
