7 / 11
Front Panel of ET-HD0101-RC
HDMI OUT:
Connect to a HDMI display with a HDMI male-male cable here.
Signal Level:
Adjust the 8-level equalization control to the received HDMI signals. 0 – 7 = strongest –
weakest for respective transmission length [long to short]. It is recommended to switch
from 7 to 0 to find the optimal visual experience.
IR Receiver:
Infrared 3.5mm socket for plugging in the extension cable of IR receiver.
Rear Panel of ET-HD0101-RC
A/V SIGNAL:
Plug in a Cat-5/5e/6 cable that needs to be linked to the
A/V SIGNAL
port of the
transmitting unit ET-HD0101-TC.
CTRL CHANNEL:
Plug in a Cat-5/5e/6 cable that needs to be linked to the
CTRL CHANNEL
port of the
transmitting unit ET-HD0101-TC.
+5V DC:
Connect to 5V DC power supply.