Data Video SE-650 Page 37 Instruction Manual Download

Page: 37 / 41

Appendix 2: Firmware Upgrade

Datavideo usually releases new firmware containing new features or reported bug fixes from time to
time. Customers can either download the SE-650 firmware as they wish or contact their local dealer or
reseller for assistance.

This section outlines the firmware upgrade process which should take

approximately 10 minutes to

complete

The existing SE-650 settings should persist through the

firmware upgrade process, which should not

be interrupted once started

as this could result in a non-responsive unit.

Please visit

www.datavideo.com

and download the latest version of firmware.

Save the latest version of firmware in the root directory of the thumb drive.

Connect the thumb drive containing the latest SE-650 firmware to the

F/W UPGRADE

Port.

Enter “

MENU

” and select “

SETUP

” option.

In the “

SETUP

” option, select “

UPGRADE

” and press the “

ENTER

” button to start the upgrade.

When the “

UPGRADE

” sub-option turns to green from red, it indicates that the firmware upgrade

is complete.

Reboot the SE-650 to complete the firmware upgrade.

Summary of Contents for SE-650










































Search results

Summary of Contents for SE-650

Reviews:

Related manuals for SE-650

Brands by name

Popular brands

Data Video SE-650, Instruction Manual

Search results

Summary of Contents for SE-650

Reviews:

Related manuals for SE-650

Brands by name

Popular brands