NACE:
610-429-1511
| [email protected] | www.datatronix.biz | | DT-HDIPSS Manual v1.0
Page 14
Encoder Setup
The DT-HDIPSS provides the user with a variety of parameter settings. Many of the default settings will allow the
user to quickly start streaming video. Only some of the settings shown will require any change.
Video Control
Select Video Input
Setting the device to
Auto Detect
allows the Encoder to automatically recognize which video source the user is using.
Selecting HDMI, Component, or Composite “locks” the encoder to detect only the input type selected.
Note: We recommend using the Factory default 'Auto Detect'
Set Video Output Format
The DT-HDIPSS can output High Quality HD/SD video streams in either MPEG-2, MPEG-2 CBR (Constant Bit Rate),
H.264, H.264 CBR.
Select
the desired Video Output Format
Factory Default: H.264 CBR
Select H.264 Profile (Only for H.264/H.264 CBR)
Selecting H.264 or H.264 CBR allows the user to define / set the H.264 Profile required
Select H.264 Levels (Only for H.264/H.264 CBR)
Selecting H.264 orH.264 CBR allows the user to define / set the H.264 Levels required
