Data Translation MACH Series, Getting Started Manual

Page: 29 / 62

Installing the Board
21
3
3
3
3
3
3
3
3
3
Inserting the DT3154 Board in the
Computer
To insert the DT3154 board in the computer, perform the following
steps:
1. To discharge any static electricity, hold the wrapped board in one
hand while placing your other hand firmly on a metal portion of
the computer chassis.
2. Carefully remove the antistatic packing material from the board.
(We suggest that you save the original packing material in the
unlikely event that your board requires servicing in the future.)
3. Hold the board by its edges and do not touch any of the
components on the board.
4. Position the board so that the cable connectors are facing the rear
of the computer, as shown in
Figure 2 .
Figure 2: Inserting the DT3154 Board in the Computer
Rear of Computer
DT3154 Board
PCI Expansion Slot Bus Connector