Data Translation DT9835, User Manual

Page: 62 / 80

Appendix B
52
Table 9 lists the pin assignments of connector J1 on the DT9835
function module and on the STP100 screw terminal panel.
Note: Because of different vendor number pinning schemes, the
Robinson Nugent connector specified on page 49 has a mirror pinout
from that described in this appendix. The Data Translation STP100
and EP331 cable already account for the mirroring; however, if you
are building your own cable or screw terminal panel, you must take
this into account.
Table 9: Pin Assignments for Connector J1 on the DT9835 Function Module
and on the STP100 Screw Terminal Panel
Pin
Number Signal Description
Pin
Number Signal Description
1 Bank 0, Bit 0 2 Bank 0, Bit 1
3 Bank 0, Bit 2 4 Bank 0, Bit 3
5 Bank 0, Bit 4 6 Bank 0, Bit 5
7 Bank 0, Bit 6 8 Bank 0, Bit 7
9 Bank 1, Bit 0 10 Bank 1, Bit 1
11 Bank 1, Bit 2 12 Bank 1, Bit 3
13 Bank 1, Bit 4 14 Bank 1, Bit 5
15 Bank 1, Bit 6 16 Bank 1, Bit 7
17 Bank 2, Bit 0 18 Bank 2, Bit 1
19 Bank 2, Bit 2 20 Bank 2, Bit 3
21 Bank 2, Bit 4 22 Bank 2, Bit 5
23 Bank 2, Bit 6 24 Bank 2, Bit 7