Data Translation DT3145, Getting Started Manual

Page: 7 / 60

About this Manual
vii
• GLOBAL LAB Image/2 User’s Manual (UM-17790). This manual
(GLIUM.PDF), included on the Imaging OMNI CD, describes
how to use GLOBAL LAB® Image/2 to create scientific
applications.
• DT Vision Foundry User’s Manual (UM-17755). This manual,
available from Data Translation, describes how to use DT Vision
Foundry

to create machine vision applications.
• Camera Link Specification, available from the Automated
Imaging Association (AIA) at http://machinevisiononline.org.
Where to Get Help
Should you run into problems installing or using a DT3145 board, the
Technical Support Department is available to provide technical
assistance. Refer to
Chapter 6 starting on page 39 for more
information. If you are outside the United States or Canada, call your
local distributor, whose number is listed in your Data Translation
product handbook.