background image

iii

MIO-2261 User Manual

 

Product Warranty (2 years)

Advantech warrants to you, the original purchaser, that each of its products will be
free from defects in materials and workmanship for two years from the date of pur-
chase. 
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Advantech, or which have been
subject to misuse, abuse, accident or improper installation. Advantech assumes no
liability under the terms of this warranty as a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous testing, most of
our customers never need to use our repair service. If an Advantech product is defec-
tive, it will be repaired or replaced at no charge during the warranty period. For out-
of-warranty repairs, you will be billed according to the cost of replacement materials,
service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:

1.

Collect all the information about the problem encountered. (For example, CPU 
speed, Advantech products used, other hardware and software used, etc.) Note 
anything abnormal and list any onscreen messages you get when the problem 
occurs.

2.

Call your dealer and describe the problem. Please have your manual, product, 
and any helpful information readily available.

3.

If your product is diagnosed as defective, obtain an RMA (return merchandize 
authorization) number from your dealer. This allows us to process your return 
more quickly.

4.

Carefully pack the defective product, a fully-completed Repair and Replacement 
Order Card and a photocopy proof of purchase date (such as your sales receipt) 
in a shippable container. A product returned without proof of the purchase date 
is not eligible for warranty service.

5.

Write the RMA number visibly on the outside of the package and ship it prepaid 
to your dealer.

Technical Support and Assistance

1.

Visit the Advantech web site at www.advantech.com/support where you can find 
the latest information about the product.

2.

Contact your distributor, sales representative, or Advantech's customer service 
center for technical support if you need additional assistance. Please have the 
following information ready before you call:

Product name and serial number

Description of your peripheral attachments

Description of your software (operating system, version, application software, 

etc.)

A complete description of the problem

The exact wording of any error messages

Data Modul AG    -    www.data-modul.com 

Summary of Contents for MIO-2261




















































































Reviews: