12048321 Rev. 01 (Draft)
65
DATA MODUL AG | www.data-modul.com
Pinout
J44
Pin
Signal / Function
Pin Type
Signal Description
1
FORCE_RECOV#
I (1.8V)
Boot-Strap Input
2
GND
GND
Connected to ground potential of the PCB
3
BOOT_SEL0#
I (1.8V)
Boot-Strap Input
4
GND
GND
Connected to ground potential of the PCB
5
BOOT_SEL1#
I (1.8V)
Boot-Strap Input
6
GND
GND
Connected to ground potential of the PCB
7
BOOT_SEL2#
I (1.8V)
Boot-Strap Input
8
GND
GND
Connected to ground potential of the PCB
5.2. V-TCON Selection Jumper
Reference Designator:
– J60
Description
The J60 voltage selection jumper allows selecting the V-TCON voltage level for V-By-One display between
5V/10V/12V.
Component drawing
Figure 46 Connector
– J60
Pinout
J60
Pin
Signal / Function
Pin Type
Signal Description
1
V_TCON_12V
I
V-TCON 12V selection input, high active
Pull-down 10kOhm on CB
2
V_3V3_S0
Power 3.3V (S0)
Power for selektion pins
3
V_TCON_10V
I
V-TCON 10V selection input, high active
Pull-down 10kOhm on CB
Functional table.
See voltage selection information printed on the PCB-Silkscreen below the J60.
V_TCON
V_TCON_10V
V_TCON_12V
5V
0
0
10V
1
0
12V
0
1
Force V-TCON DCDC enable override
1
1
(V-TCON disabled)
