Data Modul ECM-QM57 User Manual Download

Page: 58 / 80

ECM-QM57

ECM-QM57 User’s Manual

Item

Option

Description

ME SMBus Thermal Reporting

Disabled,

Enabled

Enabled/ Disabled ME SMBus

Thermal

Reporting Configuration.

SMBus Buffer Length

1, 2, 5, 9,

10, 14, 20

SMBus Block Read message length

for EC.

Thermal Reporting EC PEC

Disabled,

Enabled

Enable Packet Error Checking (PEC)

for SMBus Block Read.

Select slots with TS on DIMM

No TS on DIMM,

TS on DIMM in Slot

SODIMM0,

TS on DIMM in Slot

SODIMM1,

TS on DIMM in Slot

SODIMM0 and SODIMM1

Enable temperature reporting for slots

with TS on DIMM.

NOTE: SODIMM0 is one of the one

closer to CUP.

MCH Temp Read

Disabled,

Enabled

MCH Temperature Read Enabled.

PCH Temp Read

Disabled,

Enabled

PCH Temperature Read Enabled.

CPU Energy Read

Disabled,

Enabled

CPU Energy Read Enabled.

CPU Temp Read

Disabled,

Enabled

CPU Temperature Read Enabled.

Alert Enable Lock

Enabled,

Disabled

Lock all Alert Enable settings.

CPU Alert

Enabled,

Disabled

CPU Alert pin enabled.

MCH Alert

Enabled,

Disabled

MCH Alert pin enabled..

PCH Alert

Enabled,

Disabled

PCH Alert pin enabled.

DIMM Alert

Enabled,

Disabled

DIMM Alert pin enabled.

Data Modul AG - www.data-modul.com

Summary of Contents for ECM-QM57

















































































Search results

Summary of Contents for ECM-QM57

Reviews:

Related manuals for ECM-QM57

Brands by name

Popular brands

Data Modul ECM-QM57, User Manual

Search results

Summary of Contents for ECM-QM57

Reviews:

Related manuals for ECM-QM57

Brands by name

Popular brands