11
DLM4000 User Guide
PN 161-09997-003A
Feb 2005
Type in an appropriate name for your connection. After you have typed a name, select OK. Another window is displayed
requiring the entry of additional information about the configuration.
In this next window, the entry of a phone number is ignored. At the bottom of the window is an option to “Connect using:”
and there is an arrow. Select the arrow and more options will be displayed. Select the computer COM port that the
DLM4000 is connected to. Now select OK. Another menu is displayed:
3. Transferring a Text File
The above settings are standard for the DLM4000. The DLM4000 modems may have been setup for other data rates.
Make sure that the data rates are set the same. Select OK after making the above changes. The HyperTerminal
connection window will now be displayed. At this time, it is necessary to place a paperclip or jumper wire in the serial port
of the receiving modem. The following diagram illustrates how to accomplish this:
ON
OFF
9VAC
PHONE
OUT
PHONE
IN
13
25
1
14
PINS 2 AND 3 JUMPERED
The jumper on the serial port of the receiving modem will allow data that is being sent to the modem to be sent back to the
transmitting DLM4000. The text file that is being sent will be displayed on the screen of the computer. It is now time to
transfer a text file.
Select “transfer” at the top of the window. Some additional options will be displayed. Select “text file transfer.” A new
window appears prompting for a text file to transfer. Any text file may be transferred, but a large file size is preferred. If
Windows is being used, a good file to select is located in the Windows folder. Once the Windows folder is selected, the file
Network.txt can be located by scrolling to the end of the folder directory. Select this file and the text file transfer will begin.
The information being displayed on the computer screen should be readable with no missing characters.
If problems arise, see the troubleshooting section of this manual or contact technical support at (425) 882-2206 or e-mail
[email protected]
