Data I/O PSV5000, Owner'S Manual

Page: 67 / 176


Administrator Functions ≡ Reference List of Operator Functions
PSV5000 Owner’s Manual - 63 -
Administrator Functions
Administrators are responsible for creating Tasks in TaskLink™ and Job
Creator, and for other functions
not
generally performed by operators.
Administrators would likely perform these functions:
• Editing the winAH400.ini File on page 64
• Creating a Task in TaskLink on page 64
• Creating Security Profiles on page 65
•
(Optional) Do a First Article Test on page 66
•
(Optional) Setting TaskLink to Operator Mode on page 68
•
Enhanced Yield Programming
on page 68
•
Teaching the Workspace Locations on page 69
• Optimize Movetimes on page 70
• Monitoring Statistics on page 71
• Maximizing Programming Yields on page 77
• (Optional) Creating a Data File from a Master Device on page 80
• Creating a Laser Marking File (if marking) on page 81
• Automotive Performance Pak on page 89
These functions are discussed in this section.
Reference List of
Operator
Functions
These functions for operators are
discussed in the separate Operators
Manual .
NOTE: All users, administrators, and operators should know these
procedures.
Checking the System
Installing Input/Output Media
Installing Socket Adapters and Actuator Plates
Installing the Correct Probe
(Optional) Installing the Correct Shuttle Cups
Turning PSV5000 System Power ON
Selecting a Job (Starting CH700 via TaskLink or Job Runner)
(Optional) Preselecting Programmers
Setting Media and Options—the Setup window
Starting Programming