Data General AViiON 5500 Series, Installing, Expanding, And Maintaining

Page: 45 / 192

Connecting a local area network cable
2-9
014–002250–01
Computer Unit Rear Panel
LAN
Figure 2–6 Connecting the LAN transceiver cable to the computer unit
2. Unlock the slide clip on the computer unit connector as shown in
Figure 2–7(A). Line up the slide clip on the connector so that the
clip mounts on the cable can pass through, as seen in Figure 2–7(B).
Then, push the cable firmly into the connector.
3. Once the cable and clip mounts are secured to the connector, slide
the clip down using a screwdriver or a comparable tool to lock the
cable in place, as shown in Figure 2–7(C).
Transceiver cable
(male)
Slide clip
up to
unlock
Plug the transceiver cable
into the LAN connector
Cable connector
(male)
Slide clip mounts
LAN connector
(female)
(B)
Slide clip
down to
lock
(C)
(A)
Figure 2–7 Attaching and securing the LAN transceiver cable