Data Domain DD400 Series User Manual Download Page 168

Page: 168 / 300

Remove Clients

130

DD400 Series Restorer User Guide

secure

Requires that requests originate on an Internet port that is less than IPPORT_RESERVED

(1024).

insecure

Turn off the

secure

option

anonuid=

Set an explicit user-ID for the anonymous account. The

is an integer bounded from

-65635 to 65635.

anongid=

Set an explicit group-ID for the anonymous account. The

is an integer bounded from

-65635 to 65635.

For example, to add an NFS client with an IP address of

192.168.1.02

and read/write access to

/ddvar

: with the

secure

option:

nfs add /ddvar 192.168.1.02 (rw,secure)

Remove Clients

To remove NFS clients that can access the restorer, use the

nfs del

export

client-list

operation. A client can be removed from access to

/ddvar

and still have access to

/backup

. The

client-list

can contain IP addresses, hostnames, and an asterisk (*) and can be comma-separated,

space separated, or both.

nfs del {/ddvar | /backup[/

subdir

]}

client-list

For example, to remove an NFS client with an IP address of

192.168.1.02

from

/ddvar

access:

nfs del /ddvar 192.168.1.02

Enable Clients

To allow access for NFS clients to a restorer, use the

nfs enable

operation.

nfs enable

Disable Clients

To disable all NFS clients from accessing the restorer, use the

nfs disable

operation.

nfs disable

Summary of Contents for DD400 Series













































































































































































































































































































Search results

Summary of Contents for DD400 Series

Reviews:

Related manuals for DD400 Series

Brands by name

Popular brands

Data Domain DD400 Series, User Manual

Search results

Summary of Contents for DD400 Series

Reviews:

Related manuals for DD400 Series

Brands by name

Popular brands