Data Display Beacon Sign User Manual Download | Manualshive

Page: 36 / 40

background image

Display User Manual

DDJ07850001

26-Jan-04

Page 36

7 Effects

7.1 ON/OFF Effects

Each frame you send to a Display can have an on/off command/effect which you setup by clicking
on the Frame|Setup menu. The complete set of commands available is as follows:

Jump

Immediately places the frame onto the Display as is.
Use: On and Off Command

Vertical/Up

Scroll up vertically the next frame onto the Display.
Use: On and Off Command

Open

This creates a curtain effect by opening the frame from the center of the Display out to the edges like
an opening curtain, it has the opposite effect to CLOSE below.
Use: On and Off Command

Sparkle

This command has the effect of showing a frame gradually LED by LED until the entire message is
visible. The message appears to fade onto the Display.
Use: On and Off Command

Wipe

Left

or

Wipe

Down

This command is like a one-sided curtain. It wipes the next frame onto the Display in the direction
relating to the WIPE effect selected i.e. Left or Down.
Use: On and Off Command

Close

This command is the opposite to OPEN in that is closes the frame onto the Display screen from the
edges to the center like a closing curtain.
Use: On and Off Command

Down

This command is the opposite of VERTICAL in that it causes the next frame to be scrolled down
vertically onto the Display.
Use: On and Off Command

Hold

This command only works if it is used as an off effect. It causes the frame to be kept on the Display
until the next frame is drawn over it or it is scrolled off by any of the scroll effects.
Use: Off Command ONLY

Background

This command when used as an off effect causes a frame to stay in the background permanently.
This means that when subsequent frames are drawn off the Display the background will start to
appear instead of the Display going blank.
Use: Off Command ONLY

Run

With this command a frame is scrolled horizontally onto the Display screen from right to left. It is
used in the setup of various text frames. Use: Off Command ONLY

«
...
34
35
36
37
38
...
»

Summary of Contents for Beacon Sign









































Reviews:

No comments

Related manuals for Beacon Sign

Brand: Delfield Pages: 2

Display Case Parameter Settings Service

Brand: Foster Pages: 17

Brand: Winco Pages: 8

Brand: Moducase Pages: 18

Brand: Hussmann Pages: 6

Brand: Hussmann Pages: 13

Brand: Hussmann Pages: 18

Brand: Hussmann Pages: 42

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands