First Installation
10
Exercise caution when installing
It is only allowed to lift and transport the device by the handles. The frame of the panel-casing is only 0,3 mm. By lifting the
device at the frame of the panel-casing, breakage of the glass, defaults of the slots or buckle of the case could be possible
results. It is also not allowed to get the panel under pressure at the frontside.
Defects (especially of the panel), which are made by faulty handling, are not covered by a warranty.
1. grip and transport correclty:
- at rear of the device-sides, only in the area of the casing and handholds
- transport only by twos
2. Avoid:
- press on the panel
- press on the panel-frame
- grip or lift on both sides on the panel-frame/ panel
Mounting with brackets
The monitor can be mounted in landscape format and portrait format. The operating position of the device is perpendicular (90 degrees
to the floor). Pay attention to the permissible tilt angle for wall mounting.
The device can be operated both in landscape mode and in portrait mode. The information is for positioning to note on the back of the
device, always.
VESA-standards: MIS-F 400 x 400 mm (M6)
500 x 380 (Endless Mounting Rail Distec)
