22
3.2 Connecting
520XV-BM
3.2.1 Connecting Standalone PC
Refer to the following procedures to setup the
5201V-
BM
to a
standalone PC.
1.
Set
the
5201V-BM
to
be
CO
mode
or
CPE
mode
from
the
DIP
switch at the rear panel.
2.
Power on the
5201V-BM
by connecting its power source.
3.
Power LED will illuminate.
4.
Use one RJ-11 wire and make a connection between
5201V-
BM
and “Line” port of splitter from
5201V-BM
package.
5.
Connect VDSL line from another VDSL device to DSL port of
the splitter that connects to
5201V-BM
VDSL port.
6.
LNK LED will from blinking to illuminate.
7.
Connect telephone to the PHONE port of the splitter that
connects to
5201V-BM
VDSL port.
8.
Connect
5201V-BM
Ethernet port to PC Network Interface
Card
(NIC) via regular Cat. 5 cables.
Telephone wire
100Base-TX UTP
5201V-BM
Phone
RJ-11 Phone Jack
PC
Splitter
RJ-11 Line Cord
RJ-11 Line Cord
Phone
RJ-45 Cat.5
Twisted Pair Cable
VDSL
TP
Figure 3-3:
Connecting Standalone PC