eBOX-F Manual – Version 1.0
Page 17
Can not recognize
Try to do the action below
Make sure all cables and AC cord has been connected properly
Make sure power LED light is on.
Make sure HDD S-ATA convert adapter setup properly
Can not operate OS
Don’t support OS operation
Power LED light is on, but HDD doesn’t work
Please make sure all cables connect properly if it connects beside provided cables, it may cause
any damage. Therefore, please use provided cables
Transmission speed is slow
If connect FIREWIRE1.1 interface, the speed will be 1MB/sec.
When Windows2000 XP is formatting; the dialog box appear Unfinished
formatting ;then it can not be formatted
Windows2000 XP can not format HDD over 32GB by FAT32 Please format by NTFS
When using different capacity brand HDD; can us still using combine mode
YES
─
Caution
─
1.
It is prohibit to reprint the part of the contents and all
2.
The contents of this manual subject to change without notice.
3.
Even though the content is written carefully; If notice there is some mistake or
omission; Please contact with us
4.
Reference the result causes the influence, It is unrelated with3.then we are
apology for any responsible
