4
1.2 Precautions for Use
Warning
Do not drive with the front cover open
.
The power switch and PCB are exposed, and can cause electric shock.
Do not operate the switch with wet hands.
It may cause electric shock.
Do not open the front cover except for regular checks, even if the power is not on.
Even if power is lost, the internal PCB in the terminal may be charged, causing an electric
shock.
When performing wiring or routine checks, turn off the power and check that the input
power of the terminal is discharged with measuring equipment such as Multi-Tester (VOM)
after 5 minutes.
The high voltage may be charged to the PCB inside the terminal, causing electric shock.
Do not use the wire when it is damaged.
It may cause electric shock.
Do not place heavy objects on the wire.
Damage to the wire sheath can cause electric shock.
Do not input power even if installation is complete on terminals with damaged parts.
It may cause electric shock.
Caution
Do not install near flammable materials.
Installation on or near flammable materials may cause fire.
In case of terminal failure, disconnect the terminal input power.
Failure to do so may result in a fire caused by a secondary accident.
Do not turn on the power even if the installation is complete on devices with damaged
products.
It can cause electric shock and bring damage to additional parts.
Do not allow foreign substances such as screws, metal substances, water or oil to enter the
terminal.
It may cause fire.
