5
2. SET UP
2.1 GENERAL:
• Insert your Micro SD Card (not included) into the Micro SD Card slot
under the protective rubber flap on the underside of the camera.
• The Auto On/Off feature will power the
DSH-440
up and begin
recording as soon as it receives power from the USB Mini connection
(eg. when you start your car)
2.2 INSTALLATION:
• Clean the interior of your windscreen ensuring that the desired point
of installation is free of dust and is not obstructing the drivers’ view.
• Attach the
DSH-440
to the included mount by inserting the mount’s
lock peg into the mounting socket on the
DSH-440
, firmly sliding the
mount from right to left along the mount connection locking the DVR
in place.
• Remove the protective stickers on the suction cup of the mount, the
3.0” LCD Screen and the lens.
• With the mount’s suction mount lock switch in the up position, press
the suction cup onto the desired position on your windscreen.
• Lock the mount in place by pressing the lock switch in the down
position.
• Use the nut to adjust the angle and position of the
DSH-440
and
tighten to lock your positioning.
• Finally connect the
DSH-440
to power using the included USB Mini
power supply.
3. OPERATION:
• Once the camera is set up with the included Mini USB power supply
and a Micro SD Card (not included) has been installed, the
DSH-440
will automatically power on and start recording when the car is
started.
• The
DSH-440
is designed to be primarily powered by your car’s DC
power. The on board battery is for short use only and mainly serves
to power the cars Park mode and brief use for documenting external
damage in the case of an incident.
• While recording you will not be able to access the menus or change
modes, to stop a recording push the OK button.
• The
DSH-440
is optimised for Micro SD Cards class 4 and above
with a capacity up to 32GB.
• The on board ‘
G- Sensor
’ registers any activity that could be an
accident and registers the footage as a ‘
Locked
’ file ensuring
that the footage cannot be accidentally recorded over. To remove
‘
Locked
’ files you must first unlock them using the ‘
Protect
’ menu
(navigating to
PLAYBACK
mode using the
MODE
key, selecting the
‘
Locked
’ file, pushing the
MENU
button and selecting ‘
Protect
’).
