DASHCLEAN G12, Operating Manual

Page: 12 / 40

page- 12
Operating Manual G12/G18/G22/G32
2020 rev. 4.0

Assemble the holder onto the machine and strap the opening facing upwards
with the belt.

Pull down the outside end and close it using a zip tie.
Before changing a fold bag or a regular bag, make sure the filter cleaning cycle
has been completed.
13. Filter change
Unhealthy dust can be spread during filter change. Accordingly, the user should
wear protective glasses, protective gloves, and a breathing mask conforming to
protection class FFP3.
WARNING! Remember to switch off the machine and pull the plug out of the outlet
before servicing.
1) Change of main filter

Loosen the 3 hooks and remove the top cover. Take out a new filter from its
bag. Lift out the used filter from its chamber and place it gently into the filter
bag. This bag must be closed and diposed properly.

Insert a new filter.

Put back the top head and close the 3 hooks properly.
IMPORTANT! If you are removing the main filter in order to clean it. Hitting the
filter with force or use of compressed air will destroy the filter. It can handle water,
but high pressure water cleaning will destroy it.
2) Change of HEPA filter

Loosen the 2 nuts on each filter cover. Take out a new filter from its bag. Lift out
the used HEPA filter from its chamber and place it gently into the filter bag.
This bag must be closed and diposed properly.

Insert a new filter to the filter chamber.

Put back the filter cover and close the 2 nuts properly.
IMPORTANT! HEPA filters can’t be cleaned, trying this might destroy it. When
installing the replacement filter, make sure not touch the inside of the filter. Any
kind of force/damage on the inside of filter media will destroy the new filter.