Dash ZEFON BIO-PUMP Instructions Download Page 1

Page: 1 / 4

www.dashequipmenthire.com.au | [email protected] | 1300 092 647 | ABN-12 122 126 126

ZEFON BIO-PUMP INSTRUCTIONS

Please read instructions before using the BIO-PUMP

Initial Instructions:

For the most accurate test results, please close doors and windows prior to sampling (preferably

24hours before). Outside air may contain high levels of mould spores, and could affect your

results if direct airflow from outside is let in.

Note: It is standard practice to test the air quality outside to give context of the quality of air

in your location, and to have something to compare to when testing indoor air quality.

ZEFON BIO-PUMP

Summary of Contents for ZEFON BIO-PUMP

Page 1: ...te test results pleaseclose doors andwindows priorto sampling preferably 24hours before Outside air may contain high levels of mould spores and could affect your results if direct airflow from outside...

Page 2: ...a any height from 1 0m to 1 5m off the ground e g on a table bench If the batteries are low plug in the AC charger whilst testing Alternatively leave the unit t o charge for an hour Step 2 Take a cart...

Page 3: ...position this would be three times Once selected press the START STOP button The test will take 5 minutes to complete Step 3 Remove the seal from the top and bottom of the cartridge save to reseal la...

Page 4: ...cartridge Place the cartridge back into the box Step 6 Repeat STEPS 1 5 if you need to take more tests Once all tests are completed book your lab test and record the receipt number on the Chain of Cus...