Dash DPB500, User Manual

Page: 10 / 56

10 ∙ Blender Settings Guide
START/STOP BUTTON
When the blender is first plugged in, it is in energy saving mode and the “Start/Stop” button will
immediately flash red. To begin using the blender, push the flashing “Start/Stop” button. After
pushing the “Start/Stop” button, the preset Digital Dial, “Speed”, “Time” and “Pulse” buttons will
light up and the blender is ready for use. To begin using the blender, select a setting from the preset
Digital Dial menu (“Purée”, “Soup”, “Smoothie”, “Crush” or “Frozen”) or operate in “Manual” mode
using the “Pulse”, “Time”, or “Speed”options. To terminate blending at any point during operation,
push the “Start/Stop” button.
PULSE BUTTON
The “Pulse” button allows you to run the blender at its highest speed (H) for short time intervals.
Press and hold the “Pulse” button to achieve desired blending results. The blender will immediately
stop upon releasing the “Pulse” button.
TIME SETTING BUTTONS
When the preset Digital Dial is on the “Manual” setting (or mode) you can customize your blending
time. To increase blending time, press the “Time +” button; to decrease blending time, press the
“Time -” button. The longest/maximum time setting is 10 minutes, and is displayed as 10:00. When
the digital time/speed display reads 00:00, the blender has no time set for blending. Optionally,
you may adjust the time (“Time +” or “Time -”) when the blender is running. When you have set your
custom time, press the “Start/Stop” button to operate the blender. To terminate blending at any point
during operation, push the “Start/Stop” button.
SPEED SETTING BUTTONS
When the preset Digital Dial is on the “Manual” setting (or mode) you can customize your blending
speed. To increase the blending speed, press the “Speed +” button. To decrease blending speed,
press the “Speed -” button. Blending speeds are: 1, 2, 3, 4, 5, 6, 7, 8, 9, and H (for high.) Optionally,
you may adjust the speed (“Speed +” or “Speed -”) when the blender is running. When you have set
your custom speed, press the “Start/Stop” button to operate the blender. To terminate blending at
any point during operation, push the “Start/Stop” button.
BLENDER SETTINGS GUIDE