∙ 9 ∙
∙ 8 ∙
setting up your illusion mirrored kettle
USING your illusion mirrored kettle
Clean your Illusion Mirrored Kettle thoroughly before using. Always unplug the appliance
prior to cleaning or storing.
WARNING:
The Illusion Mirrored Kettle and its Power Base are NOT dishwasher safe.
BEFORE FIRST USE
Remove all packaging material and stickers before using your Illusion Mirrored Kettle.
•
Using a dish brush, wash the inside of the Kettle with warm soapy water and then rinse thoroughly.
•
To sterilize the Kettle, fill with water to the MAX line, place on Base, and press the On/Off Lever down.
Once water is boiling, discard the water and allow the Kettle to cool.
ATTENTION
: Do not use abrasive scrubbers, sponges, or chemical cleaners on the interior or exterior
of the Kettle as they will damage the appliance and the exterior mirror finish.
Warning:
Never fill the Kettle above the Max 1.7L marker. Exceeding 1.7L can result in electric shock.
Once the water comes to a boil, the Kettle will automatically turn off. To
serve, lift the Kettle off of the Power Base by the Handle and tilt to pour.
Place the Kettle on the Power Base and push down the On/Off Lever to
turn the appliance on. The Indicator Light will illuminate, signaling that
the Kettle is heating up.
Press the Lid Release Button to open the Lid.
Fill the Kettle with water. Make sure not to exceed the Max 1.7L mark.
Close the Lid.
Put the Power Base on a flat and stable surface. Plug the cord into a
power outlet.
1
2
3
