∙ 16 ∙
∙ 17 ∙
Cleaning & Maintenance
•
Before cleaning, remove the plug from the wall socket and let the Egg Bite Maker
cool down completely.
•
Thoroughly clean the Egg Bite Maker after every use.
•
Do not clean the Heating Plate with metal kitchen utensils or abrasive cleaning
materials. Using these may damage the Heating Plate’s coating.
•
To clean the exterior of the Egg Bite Maker, wipe it down with water, dish soap, and
a non-abrasive sponge or soft cloth.
•
NOTE:
DO NOT submerge the Egg Bite Maker in water.
•
Clean the Silicone Cups with a soft cleaning brush to remove any food residue.
•
Make sure that the Egg Bite Maker is unplugged and all parts are clean and dry
before storing.
Troubleshooting
PROBLEM
POSSIBLE CAUSE
SOLUTION
The Egg Bite Maker
does not turn on.
The appliance is not
plugged in.
Plug the mains plug into a
grounded wall socket.
Egg bite is not
done after the
recommended time.
The Silicone Cup
is loaded with too
many ingredients and
toppings.
Allow an additional few
minutes of cooking.
The Egg Bite Maker
won’t close.
Something may be stuck
between the lid and
Silicone Cups.
Remove item that is stuck
between lid and Silicone
Cups and clean any
impacted surface.
The eggs are not
cooking.
There is no water on the
Heating Plate.
Pour water onto the
Heating Plate.
Non-abrasive Sponge
scrub with a
homemade
Submerge in Water
Do Not
