UMN:CLI
User Manual
V5824G
500
To specify the registration aging time for the ONUs that are manually registered, use the
following command.
Command
Mode
Description
onu inactive aging-time
<1-30>
GPON-OLT
Specifies the maximum number of days that an ONU is
inactive. If the ONU has been inactive during that
number of days, the ONU will be automatically
deregistered by OLT.
1-30: aging time measured in days
onu inactive aging-time disable
Sets the ONU aging time to be unlimited (default)
To display the configured aging time for the inactive ONUs, use the following command.
Command
Mode
Description
show onu inactive aging-time
[
OLT-ID
]
GPON
Shows the configured aging time for the inactive
ONUs.
show onu inactive aging-time
GPON-OLT
You can monitor how long the ONU has been inactive status displayed in the Inactive
Time field using
show onu detail-info
command. If the ONU
’s activation status is active,
the inactive time value remains unchanged at 0:00:00:00.
11.2.14
ONU Reset
For various reasons such as HW or SW error, you may need to reset an ONU (ONT). To
reset an ONU, use the following command.
Command
Mode
Description
onu reset
ONU-IDs
GPON-OLT
Resets a specified ONU.
ONU-ID: ONU ID (1 to128) or ONU serial number
11.2.15
ONU Password Type Configuration
To configure ONU password type, use the following command.
Command
Mode
Description
onu password-type
{
hex
|
ascii
}
GPON
Configures ONU password type.
11.2.16
Diagnostic Monitoring for ONU
’s Optical Transceiver
The Digital Diagnostic Monitoring Interface (DDMI) feature provides diagnostic
information about the module
’s present operating conditions. The transceiver generates
this diagnostic data by digitization of internal analog signals.
i