Dasan DW-780 User Manual Download Page 9

The DL-570 LIFTER remotely lifts the desk phone handset 

To make or answer a call. 

Electronic Hook Switch (EHS) Adapter 

EHS Adapter enables an incoming call to be answered or ended by using the On/Off 

 

 EHS is only compatible with certain telephone systems. In order to determine which 

telephones  are compatible with the EHS feature, please refer to EHS guide or 

contact your local distributor. Please also refer to your telephone’s user manual  for 

clarification. 

 

Operating Instructions 

 

-  Plug the Power Adapter DC Jack into the back of the Base Unit.(See 

Note 1 below

-  Press the Hook On/Off switch to make a call 

-  Select compatibility switch ‘1’ or ‘2’ position until you can hear the dial tone 

-  Adjust speaker and microphone volume to suit your requirement 

-  Press the Hook On/Off switch to end a call 

 

Note 1 : Factory default setup : Pairing 

-  Place the headset on the cradle 

-  Plug the power adapter into the base unit (Pairing process is automatically 

proceeding): Tel indicator is blinking. 

-  Press the ‘mute button’ of the headset until LED of the headset is blinking. 

-  If pairing is completed, you can hear beep sound and LEDs of base and headset will 

be off. 

 

Connecting To a PC

 

 

Plug the USB cable to the port on the left side of base unit. 

Summary of Contents for DW-780















Reviews: