4
Receiving a call using a telephone with LIFTER attached
z
The
telephone
rings
z
While wearing the headset, press the ON/OFF button on the Base
z
The lifter function activates (telephone connection opens)
z
The lifter function will de-activate (telephone connection closes)
5
Ending a call
z
To end the call press the ON/OFF button on the base unit or the CALL OFF
button on the headset.
6
Adjusting the TX (transmit) volume
The TX (transmit) volume can be adjusted using the volume control located on the
bottom of the base unit. Adjust the volume by turning the control left or right to
increase or decrease the level. The volume should be set to personal preference.
To adjust follow these steps:
z
Make a telephone call and ask the person you are calling for their assistance.
z
Adjust the volume as you talk by turning the control left (+) or right(-).
z
Ask the person you are calling to tell you when the volume of your voice is
acceptable.
z
If the TX(transmit) volume is still low, then set the MICROPHONE
SELECTION switch located on the bottom of the base unit to “C”
7
Adjusting the RX (receive) volume
To adjust follow these steps:
z
Make a telephone call and ask the person you are calling for their assistance.
z
Adjust the RX (receive) located on the right side on the Base unit while your
caller is speaking.
8
Muting the microphone on the headset
z
To MUTE the microphone on the headset press the MUTE button located on
the headset.
z
To turn the MUTE off, press the MUTE button again. Normal operation will
now resume.
9
VoIP with PC
z
Connect Y-cable or USB-type cable (option) between PC and PC port of Base.
z
To make call or receive through, push the PC/TEL button first and then press
the ON/OFF button.
Summary of Contents for DW-773H
Page 9: ......
