12
Manual del Usuario
/ UX series /
User’s Manual
AMPLIFIERS
DESCRIPTION
1
) SIGNAL INPUT :
XLR type input signal connectors. As the LOOP THRU connector, they are balanced with the following
pin assignments:
1=GND (Ground).
2=(+) Non inverted input.
3=(-) Inverted input.
2
) LOOP THRU :
XLR type output signal connector for connecting several units together and sending them all the same
input signal.
3
) SIGNAL / LIMIT :
Two color LED which indicates that there is signal presence if it shines green or indicates amplifier
saturation and the amplifier limiter is activated, if it shines red.
4
) IDENTIFY / COMMS :
Orange LED that shines flashing when we push IDENTIFY (to identify the unit) or blink faster if there is
TM
communication with
DASnet
.
5
) ON / PROTECT :
Two color LED indicates that the unit is ON if it shines green and protection if it shines red.
6
) LPF PRESET :
This push button allows the “LOW PASS FILTER” selection. The LED shining indicates the selected value.
7
) CARDIOID PRESET :
This push button allows the “CARDIOID PRESET” selection. The LED shining indicates the selected
value: OFF, 2 units and 3 units.
100Hz
80Hz
63Hz
50Hz
L
O
W P
A
S
S F
IL
T
E
R
LPF
PRESET
UNIT NAME
STAGE / VENUE
LOW PASS FILTER
NOTES
IDENTIFY/COMMS
SIGNAL/
LIMIT
ON/PROTECT
SIGNAL INPUT
LOOP THRU
CAUTION
DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE
RISK OF ELECTRIC SHOCK
DO NOT OPEN
IN
OUT
ID DASNET
www.dasaudio.com
100-230 V~ 50/60Hz 2100W
AC INPUT
D.A.S. AUDIO S.A. (Valencia) MADE IN SPAIN
CARDIOID
PRESET
OFF
F
R
F
R
F
AC INPUT SELECT
I
REAR FRONT
2
1
6
8
5
4
12
3
9
11
10
7
SELECT AC INPUT
BEFORE CONNECTING
POWER TO THE AMP
