8
message below appears, it is an indication that at least one of these wireless
points is experiencing one or more of the following conditions: has been faulted,
has been tampered with, has a low battery, has lost contact with the security
control.
POINT FAULTED
TMPR LOBAT LOST
CHANGING USER CODES FROM THE LCD
CODEPAD
Your security system could have up to 30 individual user codes (see your
Operator's Manual for the number of codes in your system). These codes are
individually numbered from 01 to 30 (maximum number depends on your
system). To change user codes of your security system from the LCD codepad,
make sure the system is disarmed, and follow the procedure described below.
To change a user code, press the
[C]
button, followed by the user number (User
01 through User 30) you wish to change. Then enter the Master Code to show
you are authorized, and follow by the new code that you wish to program. For the
following example, let's assume the Master Code is 1-2-3-4 and we want to enter
a new code for user #05 as 5-5-5-5.
Press:
the screen will now display the following message.
C
CHANGE CODE
ENTER USER #_ _
The display now asks for the User # (01 through 30) that you wish to change.
Press:
for user #05 and the screen will display:
0
5
ENTER 4-DIGIT
CODE _ _ _ _
