Installation PCM3.0
Installation PCM3.0-- PCM3.1:
PCM3.1:
1.
To install the
DAS
DAS
®®
receiver, refer to the specific user manual;
Warning on the connection of the power supply cable
Warning on the connection of the power supply cable
::
- RED wire (fig.3) must be
RED wire (fig.3) must be DISCONNECTED
DISCONNECTED..
The switch (ON/OFF) of the receiver will be controlled by the Fiber
The switch (ON/OFF) of the receiver will be controlled by the Fiber--Optic activity
Optic activity
- YELLOW wire (fig.1)
(fig.1) must be connected to the +12V permanent/battery
- BLACK wire (fig.2)
(fig.2) must be connected to the GND.
Power supply cable
11
22
33
Multiconn Srl
Multiconn Srl
2
2.
Disconnect the original Fiber Optical cable (fig.4)
(fig.4) from the Head Unit and match it directly to
DAS
DAS
®®
fiber optic female connector of the
harness on equipment (fig.5)
(fig.5).
44
44
55
PCM3.0
PCM3.0 –– PCM3.1
PCM3.1
www.eldibg.com
car audio & multimedia system
