3º
0º
-3º
We should use the
AX-118S20
accessory as shown in the figures below, for stacking
Aero 20A
(max
4 units) over the
LX-118A
(max 3 units):
The
AX-118S20
accessory, as shown in the figures below, allows to assign an angle for a group of
stacked
Aero 20A
. The central hole corresponds to 0 °, while the top hole to -3º, and the bottom hole
to + 3°. In summary, the steps will be:
1. Release the front guides in the
LX-118A
.
2. Put a unit of
Aero 20A
over the
LX-118A
, fitting the guides at the front and insert the safety pins.
3. Ensure that the
Aero 20A
has unlocked the angulation (UNLOCK).
4. Lift the back of the
Aero 20A
and put the accessories on both sides of the box, as shown in the
figures below.
5. Insert the safety pins in the holes corresponding to the desired angle.
6. Mount the other units according to the Rigging Manual of the
Aero20A
17
Stacking system
+3º
0º
-3º
Manual del Usuario
/ LX-118
A
/
User’s Manual
